Paver sealing for St. Augustine homes
Paver Sealing in St. Augustine, FL
A quarter of St. Augustine's area is water, so call (904) 875-5989 for a free paver sealing estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in St. Augustine
Paver sealing in St. Augustine is booked with a free estimate, and a local contractor then handles the washing, the joint sand and the sealer on drives, walks, patios and pool decks. After you get your free estimate here, an answer comes within 1 business day, usually much sooner. The estimate is free and carries no obligation to hire anyone.
Think about the driveway you drove onto this morning. The joints hold weeds, the color has gone gray, and a green film sits where the shade falls or the sprinklers land. Once they are washed, re-sanded and coated, the same pavers look like one even surface. To describe yours, call (904) 875-5989.
Why hire a local paver sealing contractor in St. Augustine?
People in St. Augustine pick a local paver contractor because the town is small, old and wet, and each of those changes the work. To hear how that plays out on your street, get your free estimate.
A free look first
The contractor looks over your St. Augustine pavers before quoting anything. You hold a price in hand before you agree to start.
A range anyone can verify
Companies around Northeast Florida publish $1.75 to $3.25 per square foot to clean, sand and seal. Use that range to test any St. Augustine bid before you agree to anything.
A finish that suits the house
Matte sits quietly beside coquina and stucco. A wet look shines more but shows scuffs sooner on a driveway.
Your call, start to finish
You pick the day and the finish, and you can say no. A St. Augustine estimate never obligates you to hire anyone, and you can compare it to other quotes.
Get Your Free Estimate in St. Augustine
Tell us about your pavers in St. Augustine.
Free, no obligation
What paver problems show up most in St. Augustine?
Low ground where puddles linger
St. Augustine sits at an elevation of 0 feet on the Atlantic coast, and water covers 3.33 of its 12.85 square miles. The city says some local soils drain poorly and some drainage is old or too small. Water that stays on pavers leaves silt and feeds green film. Because sealer needs a dry surface, a low driveway waits longer before it can be coated. Standing water also leaves silt, and silt has to be washed off before the joints can be refilled.
Sand pulled out of the joints
A St. Augustine company says most local installs were filled with play sand. Summer storms and sprinkler cycles wash it out. The city averages about 50 inches of rain a year, and August and September each bring around 7 inches. Open joints let soil and weeds in, which means the weeds you pull this month started as missing sand. Refilled joints are the first line of defense against them. A St. Augustine company suggests looking over pavers once a year, which is an easy way to catch thin joints early.
Salt that settles into the pores
A St. Augustine paver company says salt air off the Matanzas River and bay can crystallize in paver pores. It puts reseal cycles near the water at 2 to 3 years, against about four elsewhere. University of Florida notes that many Floridians within a couple of miles of salt water see salt spray damage. If your driveway is that close, plan on the shorter span. Lots that face the water get the most exposure, so your lot's position comes up at the estimate.
Green film on narrow, shaded lots
Lincolnville has narrow streets and small lots with houses close to the street line. Where walls and trees block the sun, pavers stay damp. Moss and algae should not grow on pavers unless the area is heavily shaded, so a green patch tells you how little sun it gets. A north-facing patio is a common first place for mildew to start. The same company notes that algae and mildew grow in side yards, where air moves less.
A coat that has gone cloudy or peeled
One St. Augustine company says that when water soaks into pavers and darkens them fast, the old sealer is gone. It adds that peeling, cloudy sealer should be stripped before resealing. Old solvent-based sealer rules out a water-based coat, so what is down now decides the next product. If you do not know what is on your pavers, the contractor has to find out first. A simple check helps: water that beads on the paver means the coat is still working.
Does a historic district change how pavers get sealed in St. Augustine?
It can, because the city has five Historic Preservation zoning districts, and most work inside one needs a Certificate of Appropriateness. The city says replacing features with matching materials and designs may be approved administratively. Its page does not list paving or driveways by name, so ask city staff whether sealing counts at your address, then get your free estimate.
Fullerwood Park lies east of San Marco Avenue, with gridded streets and an eastern edge that curves along Hospital Creek and tidal marsh. Its homes are mostly one- and two-story Colonial Revival and Bungalow styles, which means yards are often modest in size. Nelmar Terrace was platted in 1886 and re-platted in 1913, and it was sold with big lots and deed restrictions. Tell the contractor which one you live in when you call (904) 875-5989.
Lincolnville sits on the southwest peninsula of the old city, on the west bank of Maria Sanchez Creek. Freedmen founded it in 1866, and it joined the National Register in 1991. Narrow streets and small lots put houses close to the street line, which means a crew should plan for tight access. For a plan that fits your lot, get your free estimate.
What does paver sealing cost in St. Augustine?
Published Northeast Florida prices put a clean, sand and seal at $1.75 to $3.25 per square foot. In St. Augustine, what moves you inside that range is how much green film, silt and lost sand the wash has to handle. A St. Augustine paver company says prep work moves the price more than the sealer does. For a number that fits your driveway or patio, get your free estimate.
Access counts too. A St. Augustine company lists gates, tight side yards and furniture to move as things that change a quote. Per square foot, a small patio can cost more than a long driveway, because prep does not shrink with size. Call (904) 875-5989 and ask what applies to your yard.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $525 to $975 |
| 600 sq ft | Two car driveway | $1,050 to $1,950 |
| 1,000 sq ft | Large driveway or pool deck | $1,750 to $3,250 |
| 1,500 sq ft | Driveway plus pool deck | $2,625 to $4,875 |
Math based on the $1.75 to $3.25 per square foot that Northeast Florida paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.
How does a paver sealing job work in St. Augustine?
Look over the lot and the old coat
The contractor walks your St. Augustine property and notes where water stands after rain. Pavers that have sunk, heaved or rocked get reset first, since sealing does not fix them and would only lock the problem in place. Next is the question of what already coats the surface, since water-based and solvent-based products do not mix. Mention any low spot, old stain or gate that might slow the crew, so the quote reflects the real job. A few photos of the trouble spots before the visit help the contractor plan the day.
Wash off silt, green film and salt
Cleaning comes next. It clears the green film that shade and damp leave, the silt that standing water drops, and the salt that crystallizes in the pores near the bay. Stains such as rust or oil get treated at this stage, before any sand or sealer goes down. Soft old walls nearby, like coquina or historic stucco, call for gentler methods than the pavers do, and the rinse water is kept off them. Pressure is matched to the surface, since the aim is a clean paver and not a bare one.
Put fresh sand back in the joints
Since washing pulls the old sand out, new sand goes in before sealing. In St. Augustine that step matters, because storms and sprinklers keep emptying play sand from the joints. Full joints keep soil out and discourage weeds, and sealing locks the new sand in place. If the joints have been low for years, expect this part to take longer. The sand is swept in until each joint is full, then the surface is swept clean. A St. Augustine company says sealing locks the sand in, which also makes the pavers easier to keep clean.
Wait until the pavers are dry
Sealer needs a dry surface. St. Augustine sees rain on about 118 days a year, and a shaded side yard can stay damp long after a sunny drive has dried. A careful contractor watches the forecast and holds off instead of sealing damp pavers. A film laid on a muggy afternoon can trap moisture and turn white overnight. If a shower rolls in, the job simply moves to another day.
Apply the coat and plan the next one
Now the sealer goes on in the finish you chose, usually sprayed and then back-rolled so it works into the joints. Per one Jacksonville company, a walk across it is fine within hours but cars wait about a day. Companies commonly quote two to five years between coats, and closer to two or three near the water. Ask the contractor which finish and product went on, and keep the name for next time. A St. Augustine company says sealing is not required, but it does extend the life of the pavers.
Complete paver services in St. Augustine
Four moves make up a St. Augustine job. Washing clears green film, silt and salt, which lets fresh sand refill the joints, and the coat is rolled on last over a dry surface. Each move depends on the one before it. Call (904) 875-5989 and the contractor will walk you through the timing for your lot.
Concrete pavers, brick, travertine and other natural stone all turn up around town, and they do not wear alike. A Jacksonville company says travertine, natural stone and brick are more porous than concrete and need different sealer chemistry. The surface decides the product, and a pool deck may need a different finish than a front walk. Tell the contractor what you have when you get your free estimate.
There are two sealer families, water-based and solvent-based, and two looks, matte and wet. A solvent-based coat from the past rules out a water-based one. Matte hides scuffs longer, while a wet look deepens the color but shows wear sooner, and changing finishes later means stripping the old coat. Call (904) 875-5989 and describe the look you want.
November is the driest month here, at about 2.32 inches, and cool, dry weather runs from November through April. May through October brings daily thundershowers, often brief but intense. Sealer needs a dry surface, so the cool months tend to offer more open days, though summer jobs still happen when a clear window shows up. To ask about dates, get your free estimate.
Questions to ask before you hire
- How do you keep sealer off my lawn edge and the plants along the walkway?
- Can the pool deck and the driveway both be done in one visit?
- My water comes from a well, so can the rust marks from my sprinklers come off before the sealer goes on?
- How do you get dirt and old tire marks out of my driveway pavers?
- Can I walk the finished job with you and point out any spot that looks uneven?
- How many days should the sealed pavers stay clear of foot traffic?
- Will someone look at my pavers in person, or is the price set from photos?
What do sealed pavers look like around St. Augustine?
Why local matters in St. Augustine
A contractor who works in St. Augustine knows that rain and a high tide can land on the same street on the same day, a point the city makes itself. That tells them to check a low driveway for silt before any coat goes on. Someone from out of town may not ask, and a skipped question can leave silt trapped under the sealer. To reach a local contractor, call (904) 875-5989.
Local work also means knowing the lots. Old neighborhoods have gates, side yards and tight turns, and a quote moves with each one. A local contractor can plan for them before the truck shows up, so the day runs as quoted. If your yard is hard to reach, get your free estimate and say so.
Stone near the pavers adds another layer. A St. Augustine area company says coquina and historic stucco need soft-wash methods, not pressure. A contractor who works the old city keeps rinse water and spray away from those walls, since coquina is porous. If your pavers meet a wall like that, call (904) 875-5989 and mention it.
What does St. Augustine's long history mean for my pavers?
It means your pavers may sit beside much older materials. Spanish settlers founded St. Augustine on September 8, 1565, and laborers quarried coquina for the Castillo de San Marcos, which was finished in 1695. Exposed coquina is slowly deteriorating, which is one reason to keep harsh spray away from it. If your yard touches an old wall, get your free estimate.
Henry Flagler's Ponce de Leon Hotel opened in 1888 and is now Flagler College, and the Lightner Museum fills the former Hotel Alcazar. The Bridge of Lions, finished in 1927, carries State Road A1A across Matanzas Bay. St. George Street holds more than 30 historic houses and attractions, and Nights of Lights covers downtown buildings each winter. Near one of these sights, call (904) 875-5989 and give your street.
Frequently Asked Questions
What is the cost of paver sealing per square foot in St. Augustine?
The range published around Northeast Florida is $1.75 to $3.25 per square foot to clean, sand and seal. Prep decides the St. Augustine total, and green film, lost sand and old sealer all add to it. Ask that the quote list your total area, which makes the comparison simple.
In St. Augustine, is it good to seal pavers?
Yes, for most driveways and patios here. A St. Augustine company says sealing is not required but extends the life of the pavers, and a Jacksonville company says it cuts UV fade, joint washout and mildew. Salt, rain and shade are the usual reasons local owners do it.
In St. Augustine, how long do paver sealers last?
Spans companies quote for St. Augustine pavers run two to five years between coats. A St. Augustine company says salt air can shrink that to 2 or 3 years near the water. Water that soaks in and darkens the paver fast is a sign the coat is gone.
Will Dawn dish soap clean pavers in St. Augustine?
Dish soap handles light grime, but it will not fix green film, rust, efflorescence or a failing old coat. Sealer also needs clean joints and a dry surface. That is why the contractor washes with equipment made for the job before any sealer goes on.
In St. Augustine, do I need city approval to seal pavers?
It depends on your address. Inside one of the city's five historic zoning districts, most exterior work needs a Certificate of Appropriateness. The city's page does not name paving or driveways, so check its Interactive GIS Map and ask staff before work begins.
What if my St. Augustine pavers already have a coat on them?
Not always. A water-based product will not lay over a solvent-based one, so the old coat is identified first. Cloudy or peeling sealer is usually stripped before a new coat goes on.
Does sealing level pavers that have sunk in St. Augustine?
No. A St. Augustine company says pavers that sink, heave or rock need to be reset before sealing. Point out any low spots at the first visit so they get fixed first.
How long should I wait before driving on newly sealed St. Augustine pavers?
Walking on it is usually fine within a few hours, and cars should stay away for about a day. Those times come from a Jacksonville sealing company and shift with the sealer and the weather. Ask the contractor for the exact keep-off time for your product.
Does sealing stop weeds from coming up between St. Augustine pavers?
It helps. Once joints widen, soil gets in and weeds follow. Sealed sand is a firmer barrier and also discourages ants. Sealing does not replace re-sanding, so the joints are filled first.
How do I know my St. Augustine pavers need sealing?
Look at how water behaves. A Jacksonville company says water that beads means the coat is working, and water that soaks in and darkens the paver means the coat is spent. Fading, green film and open joints are other clues.
What time of year works for sealing pavers in St. Augustine?
The dry months from November through April give the most rain-free days. A Jacksonville guide recommends fall sealing after hurricane season so pavers are protected through the dry winter. Sealing in spring sets the surface before the summer humidity builds.
Ready for a Free Estimate in St. Augustine?
Call (904) 875-5989 and tell us about your pavers.
Free, no obligation